Asus M2N-VM HDMI User Manual page 26

User manual
Hide thumbs Also See for M2N-VM HDMI:
Table of Contents

Advertisement

The motherboard can support 8 GB physical memory on the operating system
listed below. You may install a maximum of 2 GB DIMMs on each slot.
1-14
When using only one memory module, start installing the DDR2 DIMM from
slot DIMM_A1 or DIMM_B1 for better overclocking capability.
For dual-channel configuration (2), you may:
-
install identical DIMMs in all four sockets OR
-
install identical DIMM pair in DIMM_A1 and DIMM_B1 (yellow sockets)
and another identical DIMM pair in DIMM_A2 and DIMM_B2 (black
sockets)
Always use identical DDR2 DIMM pairs for dual channel mode. For
optimum compatibility, we recommend that you obtain memory modules
from the same vendor.
If you are using a Windows 32-bit version operating system (e.g. 32-bit
Windows, 32-bit Vista) without the Physical Address Extension (PAE)
support, the system will allocate a certain amount of memory space for
system devices.
We recommend that you install only a maximum of 3GB system memory
when using a Windows 32-bit version operating system without the PAE.
The excess over 3GB of installed memory will not cause any problem;
however, the system can not use this excess memory space and the
system will display less than the total size of physical memory installed.
Windows
®
Windows
®
64-bit
XP Professional x64 Edition
Vista x64 Edition
Chapter 1: Product introduction

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents