Apic Mode; Mps Version Control For Os; Full Screen Logo Show; Summary Screen Show - Biostar TP35D2-A7 Setup Manual

APIC MODE

Selecting Enabled enables APIC device mode reporting from the BIOS to the
operating system.
The Choices: Enabled (default), Disabled.

MPS Version Control For OS

The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory
exceeding 64MB.
The Choices: Non-OS2 (default), OS2.

Full Screen LOGO Show

This item allows you to enable/disable Full Screen LOGO Show.
The Choices: Enabled (default), Disabled.
Small Logo(EPA) Show
This item allows you to select whether the "Small Logo" shows.
The Choices: Disabled (default), Enabled.

Summary Screen Show

This item allows you to enable/disable the summary screen. Summary screen
means system configuration and PCI device listing.
The Choices: Disabled (default), Enabled.
TP35D2-A7
15