Biostar TP35D2-A7 Setup Manual page 27

C. Memory Integration Test (M.I.T.):
This function is under "Overclocking Navigator Engine" item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1:
The default setting under this item is "Disabled"; the condition parameter should
be changed to "Enable" to proceed this test.
Step 2:
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3:
When the process is done, change the setting back from "Enable" to "Disable"
to complete the test.
↓
TP35D2-A7
25