Asus KFSN4 DRE IKVM - Motherboard - SSI EEB 3.61 User Manual page 45

KFSN4-DRE Series IDE connector
3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
Supported by the NVIDIA
Serial ATA signal cables for Serial ATA hard disk drives that allows up to
3Gb/s of data transfer rate.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1,
RAID 1+0, RAID 5, or JBOD configuration.
KFSN4-DRE Series SATA connectors
The actual data transfer rate depends on the speed of Serial ATA hard disks
installed.
ASUS KFSN4-DRE Series
PRI_IDE1
PIN 1
SEC_IDE1
PIN 1
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
nForce4™ chipset, these connectors are for the
®
SATA2 SATA1
GND
RSATA_RXP2
RSATA_RXN2
GND
RSATA_TXN2
RSATA_TXP2
GND
SATA4 SATA3
GND GND
RSATA_RXP1 RSATA_RXP4
RSATA_RXN1 RSATA_RXN4
GND GND
RSATA_TXN1 RSATA_TXN4
RSATA_TXP1 RSATA_TXP4
GND GND
GND
RSATA_RXP3
RSATA_RXN3
GND
RSATA_TXN3
RSATA_TXP3
GND
2-25