Table of Contents
Advertisement
Encrypt files on your storage card
You can set your device to encrypt files as they are saved on the storage card.
1.
On the Home screen, slide to the Settings tab and then tap All Settings.
2.
On the System tab, tap Encryption.
3.
Select Encrypt files when placed on a storage card.
Notes
• Encrypted files can only be read on the device that encrypted them.
• Encrypted files are opened just like other files, provided you are using the device that encrypted them.
Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card
13.6 Connecting to an External Display
The Video Out function outputs the device's screen contents and audio to an external display with an RCA
cable socket such as a television.
Notes • You need an HTC TV Out cable to connect your device to an external display. The HTC TV Out cable is sold
separately.
• When you plug in the HTC TV Out cable to your device, you will not be able to play music files from the TouchFLO
3D Music tab.
• It is recommended that you use an audio accessory (not the HTC TV Out cable) such as the wired headset when
you want to listen to music on your device. You can check the HTC web site for other audio accessories for your
device.
Connect the device to an external display
1.
Turn off the external display.
2.
Connect the ends (red, white, and yellow RCA plugs) of the
HTC TV Out cable to the external display's RCA sockets.
3.
Connect the mini-USB end of the HTC TV Out cable to the sync
connector at the bottom of the device. The Video Out screen
opens.
Note The display automatically changes to landscape mode after
connecting the HTC TV Out cable.
4.
Choose the video standard to use when outputting the video
and then tap Done. For example, if your video is in the NTSC
standard and you select PAL-M, Video Out will automatically
convert your video to PAL-M before it outputs to the external
display.
Note If you need to change the video standard option in the future, tap Start > Settings > System tab > Video
Out.
5.
Tap the type of media you want to output.
6.
Turn on the external display and then switch it to the input signal that you connected the HTC TV Out
cable to (for example, Video 1).
There is no separate step for you to take to read these files.
before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no
longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile
Device Center to transfer files between your storage card and computer. After the procedure, copy
your files back to the storage card.
Managing Your Device 14
Advertisement
Table of Contents
