Turn It On & Off; Enable Security - Motorola i365 User Manual

Tip: Motorola batteries have circuitry that
protects the battery from damage from
overcharging.
Note: This handset complies with
environmental energy consumption
requirements by notifying the user to unplug
the charger from the power outlet when the
charger is disconnected from phone/power
outlet. This notice can be dismissed
permanently by pressing - under No.
turn it on & off
To turn on your
phone, press and hold
W for a few seconds
or until the display
turns on. If prompted,
enter your four-digit
unlock code.
To turn off your phone, press and hold W for
two seconds.
Note: If you press the W for more than four
seconds, the handset will power "On" in
Transmitters Off mode. To avoid turning on the
phone with transmitters off, ensure the power
key is not held at about 4 seconds after
power-up is initiated. To power up the phone
normally from charging mode, wait until the
Charger Attached screen is displayed, and then
press the power key. See "transmitters" on
page 63.

enable security

You must enable security the first time you
power on you phone or within 10 days of first
activation of your phone.
1 Press - under Ok.
2 Your are prompted to enable security.
Press - under Yes. A series of screens
essentials 15