Adding A Memory Module To The Expansion Memory Module Slot - HP Nc6400 - Compaq Business Notebook Replacement Instructions Manual

Adding a memory module to the expansion memory
module slot
To add or replace a memory module in the expansion memory module slot:
1. Save your work.
2. Shut down the computer and close the display. (If you are not sure whether the computer is off or
in hibernation, turn the computer on by pressing the power button. Then shut down the computer
through the operating system.)
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery from the computer.
7. Loosen the memory module compartment cover screw (1).
8. Lift the memory module compartment cover (2) away from the computer.
9. To remove a memory module:
a. Pull away the retention clips (1) on each side of the memory module. (The memory module
tilts up.)
2 Chapter 1 Adding or replacing memory modules ENWW