Completing Your Installation With Or Without A Bowl Light Fixture - Hunter 23722 Owners And Installation Manual

7 • Completing Your Installation With or Without a Bowl Light Fixture
Installing the Glass Bowl
7-3. If you want to install the light fixture, proceed
with Step 7-4 now.
If you do not want to install the light fixture,
you need to uninstall it now. See "Uninstalling the
Light Fixture" in Step 7-10.
7-4. First install B10 caldelabra-based bulbs (60 Watt
Maximum) into the sockets.
7-5. Thread the light and fan pull chains through the
hole in the center of the glass bowl. Then, thread
the light pull chain through the hole in the center
of the cover plate.
7-6. Thread the fan pull chain through the grommet
hole in the side of the cover plate.
7-7. Place the cover plate up against the glass bowl.
Align the holes in the cover plate and glass bowl.
7-8. Thread the light pull chain through the finial and
screw the finial onto the threaded rod end until
tight.
7-9. Attach the extra pull chains (included) to the
light and fan pull chains using the breakaway
connector. (You may find the breakaway
connector on the end of the extra chain.)
Breakaway
Connector
14
45052-01 • 04/26/10 • Hunter Fan Company
Light Bulbs
(B10
Candelabra-
Based 60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial