Operating The Remote Control - Hunter 22438 Owner's Manual And Installation Manual

10-1. The remote transmitter has four numerical buttons:
0 = Off
1 = Low speed
2 = Medium speed
3 = High speed
10-2. For best operation, start the fan by pressing 3 (high), and then
select your desired speed.
10-3 The light button turns the light on to full brightness. To dim the
light, hold the light button down until you reach your desired
brightness. Push the light button again to turn off the light.
10-4. Press the 0 button to turn the fan off.
10-5. When necessary, replace the battery with a 12-volt type 23A,
MN-21 battery or equivalent. The battery compartment is on
the back.
10-6. You can mount the remote holder to any toggle switch plate
with the screws already in the switch plate. Or, you can simply
mount the remote holder on the wall.
10 • Operating the Remote Control
Step 10-6
16
42686-01 • 05/24/11 • Hunter Fan Company
Steps 10-1 – 10-5
Step 10-5