Sony HDR-GW77V "Handycam User Manual page 44

To change the language setting
You can change the on-screen displays to show messages in a specified language.
Select [Setup]
To turn off the power
Close the LCD screen.
To adjust the angle of the LCD screen
First open the LCD panel 90 degrees to the camcorder (
Notes
The recording date, time and condition, and coordinates (HDR-GW77V) are recorded automatically
on the recording media. They are not displayed during recording. However, you can check them as
[Data Code] during playback. To display them, select
[Data Code] [Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto
Area ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending
on the country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto
Area ADJ] to [Off] (HDR-GW77V).
Related topics
To set the date and time again:
Copyright 2012 Sony Corporation
[ General Settings] [Language Setting]
[Date & Time Setting]
44
a desired language.
), and then adjust the angle (
[Setup] [ Playback Settings]
).
Back to top