Sony HDR-GW77V "Handycam User Manual page 106

"Handycam" User Guide
Operation Search
Before use
Getting started
Recording
Playback
Saving images with a PC
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Flash
If white circular spots appear on photos
You can select the flash setting when you record photos using the built-in flash, or an external flash
(sold separately) that is compatible with your camcorder.
1.
[Camera/Mic]
2. Select the desired item.
Auto
Automatically flashes when there is insufficient ambient light.
On ( )
Always uses the flash regardless of the surrounding brightness.
Off ( )
Records without flash.
If white circular spots appear on photos
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are accentuated by
the camcorder's flash, they appear as white circular spots. To reduce the white circular spots, light the
room and shoot the subject without a flash.
Notes
The recommended distance to the subject when using the built-in flash is approximately 0.3 m to
2.5 m (1 foot to 8 feet).
Remove any dust from the surface of the flash before using it. The heat of flash emission may
cause dirt on the flash surface to emit smoke or to scorch the surface. If dirt or dust adhere to the
surface of the flash use a soft cloth to clean it.
The flash does not flash while the
106
Top page > Customizing your camcorder > Camera/Mic > Flash
[ Flash] [Flash].
(Movie) lamp is lit.
Search Print