Enter Password; New Password Complete - Edimax Two-console 16 port PS/2 KVM Switch User Manual

BANK : 1
01 SYSTEM 01
After finishing the edit, please press " Enter " key for saving information.
Use " Tab " key to select items like Bank, OSD, SCAN, CHANGE PASSWORD, CONSOLE
ON/OFF, etc...
15 15☼SYSTEM 15
OSD : 1 0 SEC.
SCAN: 1 0 SEC.
ESC : QUIT
TAB : NEXT
b. The " SCAN TIME" means that scan interval from one PC port to next PC port. The
default SCAN time is 10 sec and the maximum scan time is 99 sec. \
c. The " CHANGE PASSWORD" is for user to avoid all PC systems to be intruded by the
other person. The default password is 8 digits " 00000000 ".
There is an enter password window showed out when you select this item and then
press the Enter. The maximum password is eight digits. After you key in the password
and press the Enter key, there is another window for confirming your typed password.
You need to type the password again to check if your previous key-in password is
matched or not.
02 ☼SYS█EM 02
16 SYSTEM 16
CHANGE PASSWORD
CONSOLE ON/OFF
ENTER :COMPLETE
INSERT :EDIT

ENTER PASSWORD :

ESC : QUIT
ENTER NEW PASSWORD :
ESC : QUIT
RETYPE NEW PASSWORD :
ESC : QUIT

NEW PASSWORD COMPLETE

ESC : QUIT
To press " INS " key for
editing PC name.
a. The "OSD: 10 SEC" means
that PC system name exists
10 sec. on your monitor.
You can modify it from 05
sec to 99 sec. The factory
default value is 10 sec..
Please use " Esc " to
dismiss the OSD windows
display.
█
ENTER : COMPLETE
█
ENTER : COMPLETE
█
ENTER : COMPLETE
ENTER : COMPLETE