Table of Contents
Advertisement
CONSOLE ON/OFF, etc...
15
☼SYSTEM 15
OSD :
1 0
SEC.
SCAN:
1 0
SEC.
ESC : QUIT
TAB : NEXT
b. The " SCAN TIME" means that scan interval from one PC port to next PC port. The
default SCAN time is 10 sec and the maximum scan time is 99 sec.
c. The " CHANGE PASSWORD" is for user to avoid all PC systems to be intruded by the
other person. The default password is 8 digits " 00000000 ".
There is an enter password window showed out when you select this item and then
press the Enter.
password already and press the Enter key, there is another window for confirming your
typed password.
You need to retype the password again for rechecking your previous key-in password
is matched or not.
d. The " CONSOLE ON/OFF " means to manage the console of KVM switch. If you
select " CONSOLE ON ", it means that any user can use the console. If you select
" CONSOLE OFF "(factory default OFF state), it means that any user will not be
allowed to use the console unless you enter the password. When you enter the
password already and pass the KVM switch authentication, the CONSOLE will be set
to ON. After you finish using KVM switch, please don't forget to set up CONSOLE
ON state to OFF state. Besides, if current CONSOLE is ON state and you reset KVM
16
SYSTEM 16
CHANGE PASSWORD
CONSOLE ON/OFF
ENTER :COMPLETE
INSERT :EDIT
ENTER PASSWORD :
ESC : QUIT
The maximum password is eight digits.
ENTER NEW PASSWORD :
ESC : QUIT
RETYPE NEW PASSWORD :
ESC : QUIT
NEW PASSWORD COMPLETE
ESC : QUIT
a. The " OSD: 10 SEC" means
that the OSD windows
display or PC system name
exists 10 sec. on your
monitor. You can modify it
from 05 sec to 99 sec. The
factory default value is 10
sec..
█
ENTER : COMPLETE
█
ENTER : COMPLETE
█
ENTER : COMPLETE
ENTER : COMPLETE
After you key in the
Advertisement
Table of Contents
