FCC COMPLIANCE STATEMENT This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the instructions provided with the equipment, may cause interference to radio and TV reception. The equipment has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a commercial environment.
10Mbps as illustrated in Figure 1-1, or can be 100Base-TX hub when all the connecting nodes are running at 100Mbps as illustrated in Figure 1-2. ED-1508 series dual-speed hubs are the ideal hubs for both 10Base-T and 100Base-TX networks.
Page 5
ED-1508/ED-1508X/ED-1508S/ED-1508SX Dual-Speed hubs can be set up as stand-alone units or they can be wall-mounted. ED-1508 series dual-speed hubs’ compact and slim design allows direct placing on the desktop or a small closet. They can also be conveniently mounted on the wall or...
Port LEDs : 100Mbps, Link/Activity n Dimensions : 8.7 x 4.6 x 1.18 in. / 220 x 117 x 30 mm n Weight : 1.76 lb./800g (ED-1508), 1.81 lb./820g (ED-1508X) 1.78 lb./810g (ED-1508S), 1.83 lb./830g (ED-1508SX) n Power : External full range switching power adapter, 100~240V AC...
One external switching power adapter n One power cable n One set of (two pieces) stacking brackets and rubber stands n Stacking Cable (ED-1508S/ED-1508SX only) n User’s manual 8-port 10/100Mbps ED-1508 Dual Speed Hub 100M LNK/ACT D I M A X UPLINK...
Physical Description (1) Panel LED Panel 8-port 10/100Mbps ED-1508 Dual Speed Hub 100M LNK/ACT D I M A X UPLINK RJ45 Connectors Uplink Switch Power LED 100M LED 8-port 10/100Mbps ED-1508 Dual Speed Hub 100M ED-1508 LNK/ACT D I M A X...
Page 9
LED Panel 8-port 10/100Mbps ED-1508S Dual Speed Stackable Hub 100M LNK/ACT D I M A X UPLINK RJ45 Connectors Uplink Switch Power LED 100M LED 8-port 10/100Mbps ED-1508S Dual Speed Stackable Hub 100M ED-1508S LNK/ACT D I M A X Collision Link/Activity Stacking ports...
Page 10
(2) LED Color Status Description Number of LED Power is supplied Green One for the whole Hub (Power) No power Collision detected in this segment One for 10Mbps (Segment Yellow segment and one for 100Mbps segment Collision) No Collision A valid link is established LNK/ACT Green Flash...
Installation 1. Operating Environment ED-1508/ED-1508X/ED-1508S/ED-1508SX must be installed and operated within the limits of specified operating temperature and humidity (see previous section under Specifications). Do not place objects on top of the unit. Do not obstruct any vents at the sides of the unit. Do not position the hub near any heating source such as heater, radiator, or direct exposure to sun.
Page 12
Set DIP switch to Dual Speed Hub UPLINK the right hand side 8-port 10/100 Mbps ED-1508 P W R Dual Speed Hub 100M LNK/ACT D I M A X UPLINK Set to be Uplink Port 8-port 10/100 Mbps ED-1508 P W R...
Trouble-shooting 1. Power LED is not lit l Check if the power cord is properly connected to the external switching power adapter and the power outlet. Make sure the DC power jack is firmly plugged into the power socket of the hub. 2.