Frigidaire FGHD2465NB Wiring Diagram page 2

Color Code
To start
BK............. Black
Close and latch door. Press START/CANCEL pad.
BU....... ......Blue
To delay start
Close and latch door. Press DELAY START pad to
PK..............Pink
select desired delay time.
To select a new
R................Red
Press desired cycle and/or option pad. The indicator
cycle or option
R-BK......Red/Blk lights will change. Press START/CANCEL within 15
seconds to begin cycle.
W.............White
To cancel cycle Press START/CANCEL. Dishwasher will drain for
Y-BK..Yellow/Blk
90 seconds, then shut off.
For controls
lock . . . . . . . . . Press and hold the RINSE ONLY or AIR DRY
pad for 3 seconds.
To unlock, press and hold the
AIR DRY pad for 3 seconds.
Water/Service Test
To activate Water/Service Test
place unit in Power Failure or
Idle Mode and the press"DRY
or "AIR DRY"(model dependent)
and the START/CANCEL keys for
3 seconds.
1 FILL/DISPENSER 60 1
2 FILL
27
The dishwasher will then step
45
3 WASH/HEAT/DISP.
through the test cycle per the
4 PAUSE 0.4
chart, if at any time, the START/
5 WASH/HEAT 75
CANCEL key is pressed, the
6 WASH/HEAT/DISP. 60
current step is terminated, while
7
DRAIN 90
the test sequence advances to
8 90
DRY
The next cycle step.
TOTAL 447
CLEAN LED stays on until door is opened or cycle is started.
Operation Display Codes (Readout)
PF ..........A power failure has occurred
Hd or HO
CL ..........Close and latch the door
ER/ER....Switch Failure
ER/CE....Configuration Error
ER/uo.....Vent will not close
ER/uF.....Fan not running
'01-24'
RINSE ONLY or
0 0 0 1 Uo
0 1 0 0 0 1 0 Fan Damper
1 0 0 0 0 0 1 0 0 0 1 0 Turbidity Tu
HS
0 1 0 1 1 0 1 0 0 0 1 0 Hall Sensor
0 0 0 1 0 0 1 0 0 0 1 1
0 1 0 1 0
0 0 0 0 0 0 1
0 1 0 1 1 Th
0 0 0 0 0 0 1 Thermistor
1
0 0 1 0 0 0 0 0 0 0 0 Fan Speed UF
0 0 1 X 0 1 0 0 1 0 0 0 Rinse Aid RA
0 1 0 1 0 0
X - denotes selectable option
Cycle Selection Options
SENSING ---------------------- Turbidity sensor is checking the condition of the wash/rinse water.
.........Water heating delay
WASHING ---------------------- Wash portion of cycle.
SANITIZED -------------------- The SANITIZED criteria has been met. Indicator light will switch off
DRYING ----------------------- Drying portion of cycle.
CLEAN ------------------------ Shows completion of cycle. Indicator light will switch off when door is
OPTION LED's Flashing
...Hour(s) delay before Start (some models)
(Some models)
Wiring Diagram
Display Codes (LED)
No sensing for LIGHT WASH (UPPER RACK), LIGHT WASH (LOWER
RACK) and CHINA/CRYSTAL.
when door is opened.
opened.
-- HI-TEMP WASH and NO HEAT DRY/POWER DRY OFF LED's flashing
indicates power failure has occurred. Press START/CANCEL pad and