Aspect Ratio; Setting The Image Aspect; Iso Sensitivity - Olympus 262921 Instruction Manual

Setting the image aspect

You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures
using live view. Depending on your preference, you can set the aspect ratio to
[4:3] (standard), [16:9], [3:2], or [6:6].
1
Display the live control (P. 20) and select
the aspect ratio item using FG.
2
Use HI to select an aspect ratio and
press Q.
#
Caution
• JPEG images are cropped to the selected aspect ratio; RAW images, however, are
not cropped but are instead saved with information on the selected aspect ratio.
• When RAW images are played back, the selected aspect ratio is shown by a frame.
%
Tips
• For information on cropping existing photographs or changing their aspect ratio, see
Editing still images
"

ISO sensitivity

Increasing ISO sensitivity increases noise (graininess) but allows photographs
to be taken when lighting is poor. The setting recommended in most situations
is [AUTO], which starts at ISO 200 — a value that balances noise and dynamic
range — and then adjusts ISO sensitivity according to shooting conditions.
1
Display the live control (P. 20) and select the ISO sensitivity item
using FG.
2
Select an option using HI and press Q .
• The selected option is displayed in the monitor.
The sensitivity is set automatically
AUTO
according to the shooting conditions.
200 – 6400 Sensitivity is set to the selected value.
%
Tips
• The default value and upper limit for auto ISO sensitivity can be selected using
[ISO-AUTO SET].
The options available for ISO sensitivity can be selected using [ISO STEP].
Auto sensitivity can be enabled in M mode using [ISO-AUTO].
g "Custom menu" (P. 78)
(P. 63).
"
4 : 3
P
4:3 16:9 3:2 6:6
RECOMMEND
ISO-A ISO-A
200 200
1000 F8.0 +2.0
P AUTO 200 250 320 400 500
IS OFF
j
WB WB
AUTO AUTO
1
AUTO
ISO-A ISO-A
200 200
ISO
AUTO
g g
OFF OFF
EN 45