Dhcp Server - D-Link DWL-2200AP - AirPremier - Wireless Access Point Manual

Section 3 - Configuration

DHCP Server:

Dynamic Pool
Static Pool
IP Assigned From:
Range of Pool (1~255):
SubMask:
Gateway:
Domain Name:
Lease Time:
D-Link DWL-2200AP User Manual
Enable or disable the DHCP server function.
Click to enable Dynamic Pool Settings. Configure the IP address
Settings:
pool in the fields below.
Click to enable Static Pool Settings. Use this function to assign the
Settings: same IP address to a device at every restart. The IP addresses
assigned in the Static Pool list must NOT be in the same IP range
as the Dynamic Pool.
Enter the initial IP address to be assigned by the DHCP server.
Enter the number of allocated IP addresses.
Enter the subnet mask.
Enter the gateway IP address, typically a router.
Wins:
Wins (Windows Internet Naming Service) is a system that determines
the IP address of a network computer with a dynamically assigned
IP address, if applicable.
DNS:
The IP address of the DNS server, if applicable.
Enter the domain name of the DWL-2200AP, if applicable.
The period of time that the client will retain the assigned IP address.
Status:
This option turns the dynamic pool settings on or off.
DHCP Server
76