Checking The Led Indicators; Troubleshooting - 3Com 3CRWX275075A - Wireless LAN Managed Access Point 2750 Quick Start Manual

6

Checking the LED Indicators

When the access point is connected to power, LEDs indicate activity as follows (solid LED indicates
connection; blinking LED indicates activity):

Troubleshooting

Refer to the Mobility System Configuration Guide or to the 3Com Wireless LAN Switch Reference
Manual to obtain the access point status.
LED Color
Power Green
Off
11a Green
Off
11b/g Green
Off
100 Green
Off
10 Green
Off
7
Indicates
The access point is powered up
and operating normally.
The access point is not receiving
power or there is a fault with the
power supply.
The access point has WLAN
frame transmission over the
802.11a 5.3 GHz radio band.
No link is present.
The access point has WLAN
frame transmission over the
802.11g 2.4 GHz radio band.
No link is present.
The access point has a 100 Mbps
Fast Ethernet connection.
No link is present.
The access point has a 10 Mbps
Ethernet connection.
No link is present.