Windows 98; Disconnecting The Camcorder From The Computer - Canon 7920A001 - GL 2 Camcorder Instruction Manual

Disconnecting the Camcorder From the Computer

1.
Turn off the camcorder and detach the USB cable.
● To detach the cable, always hold the connector by its sides to pull it out.
● Turn off the camcorder before inserting/removing the memory card.
●
When Uninstalling the DVC Storage Driver
If DVC Storage Driver installation has not been done correctly, or when
otherwise necessary, uninstall the driver.
1.
Connect the Power Adapter to the camcorder.
2.
Connect the camcorder to the computer using the supplied
USB cable (
3.
Slide the POWER switch to PLAY(VCR) and the TAPE/CARD
switch to CARD.
4.
On the [Start] menu, select [Settings] e [Control Panel].
5.
Double-click the [System] icon.
6.
Click the [Device Manager] tab.
7.
Check if [Canon DVC] or [USB device] is displayed under [Other
devices], [Imaging Device] or [Universal Serial Bus controllers].
• If [Canon DVC] or [USB device] is found:
1. Click [Canon DVC] or [USB device].
2. Click [Remove].
3. If a confirmation message appears, click [OK] and close [System
Properties].
• If there are multiple [Canon DVC] or [USB device] entries under
[Other devices], [Imaging Device] or [Universal Serial Bus
controllers], delete all of them.
32).
Check here
E
15

Windows 98