Installing The Dvc Storage Driver/Disconnecting The Camcorder From The Computer Windows 98 - Canon 7920A001 - GL 2 Camcorder Instruction Manual

Installing the DVC Storage Driver
The procedure for installation of the DVC Storage Driver differs depending on
the computer you are using. Confirm the OS of your computer and go to the
appropriate page as stated below.
Windows 98 (
Windows XP (
• Be sure to install the DIGITAL VIDEO SOLUTION DISK before you
connect the camcorder to the computer.
• Once you connect the camcorder to your computer after installing the
Digital Video Solution Disk, make absolutely sure not to turn off the
camcorder before installation of the DVC Storage Driver is complete.
Windows 98
Installing the DVC Storage Driver
1.
Connect the Power Adapter to the camcorder.
2.
Connect the camcorder to the computer using the supplied
USB cable (
3.
Slide the POWER switch to PLAY(VCR) and the TAPE/CARD
switch to CARD.
• The Add New Hardware Wizard will open.
4.
Click [Next].
5.
Select [Search for the best driver for your device.
[Recommended].] and then click [Next].
12
Windows 98
12), Windows Me (
27).
32).
17), Windows 2000 ( 21),