Changing The Menu Settings; Troubleshooting - JVC GZ MS130B - Everio Camcorder - 800 KP Instructions Manual

MENU SETTINGS

Changing the Menu Settings

1
Touch MENU.
2
Select the desired menu.

Troubleshooting

Before requesting service, consult the
following chart. If the solutions indicated in the
chart do not solve the problem, consult your
nearest JVC dealer or JVC service center for
instructions.
Refer also to the FAQ of new products on
JVC's website.
Trouble
No power is supplied.
The remaining battery
display is not correct.
The LCD monitor is
difficult to see.
VIDEO
REGISTER EVENT
VIDEO QUALITY
ZOOM
DIS
ON
IMAGE BLURRED NEED TO
QUIT
SET
•
Connect the AC adapter securely.
•
Recharge the battery pack.
•
Fully charge the battery pack, run it down, and then recharge it
again.
•
If the camcorder is used for long periods of time in high or low
temperatures, or if the battery pack is repeatedly charged, the
amount of remaining battery may not be displayed correctly.
•
The LCD monitor may be difficult to see if used in bright areas
such as under direct sunlight.
3
Select the desired setting.
To return to the previous screen
Select .
To quit the screen
Select [QUIT].
The following phenomena are not
malfunctions.
•
The camcorder heats up when it is used for
a long time.
•
The battery heats up during charging.
•
When playing back a video file, the
image stops momentarily or the sound is
interrupted at junctions between scenes.
•
LCD monitor momentarily become red or
black when sunlight is recorded.
•
Black spots, or red, green, or blue spots
appear on the LCD monitor. (The LCD
monitor contains 99.99% effective pixels, but
0.01% of fewer pixels may be ineffective.)
Action
VIDEO
REGISTER EVENT
OFF
VIDEO QUALITY
ON
ON
ZOOM
DIS ON
IMAGE BLURRED NEED TO
QUIT
SET
EN37