Table of Contents
Advertisement
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pump)
FUZZY COURSE
1. Put the laundry into the washer and push the POWER
button to on.
•
Fuzzy course button lights on.
2. Press START / HOLD button.
•
Measuring the weight of laundry, washer moves it's body
without water and then indicates adequate amount of
water and detergent.
•
The adequate temperature of water is automatically
selected.
3. Open the lid and put the detergent/ softener in proportion
to the water level indicated. Then close the lid.
- When you open the lid in operation, it stops washing
(But water supply will be continued).
- In case of using the hot water only, cold water is supplied
during the first 20 seconds to avoid damaging the laundry
by hot water.
- On it's operation in every course, washing time, rinsing
frequency & spinning time can be adjusted.
- With the press of the function button on water
temperature, the water temperature in washing/ rinsing
is selected manually in every course (except wool course).
- With the press of the water supplement button, additional
water is supplied in rinsing the laundry.
(except CLEAN TUB course)
BLANKET COURSE
(For big laundry like quilts
or bedcovers)
1. Put the laundry in the washer and press the POWER
button to on.
2. Select the course button once.
3. Press START/HOLD button.
Put the detergent/softener in proportion to the water level
and then close the lid.
•
Blanket may get stained with the detergent.
Therefore, detergent in the liquid detergent device
is suggested.
WASHING PROCEDURE
START/
POWER
HOLD
START/
POWER
HOLD
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
SPEEDY COURSE
( For laundries with light
dirt like towels in a short time)
1. Put the laundry in the washer and press the
POWER button to on.
2. Select the course button twice.
3. Press START/HOLD button.
Put the detergent/softener in proportion to the
water level and then close the lid.
•
Spinning the washer board brings high energy
efficiency.
•
In case of heavy laundry, it automatically spin the
washer tub to improve the power of washing.
Note
- Measuring the weight of laundry, washer moves its body
without water in every courses, and then indicates
adequate water level and amount of detergent.
(except clean tub course)
- Every course automatically indicates the water temperature
and also it can be selected by pressing the water
temperature button as you want. (except wool course)
WOOL COURSE
(For laundries with wool washing
mark like sweaters, cardigans or
delicate clothes)
1. Put the laundry in the washer and press
the POWER button to on.
•
Be sure the weight of laundry is less than 2kg.
2. Select the course button three times.
•
Select the adequate water level manually in case of light
laundry for the size
3. Press START/HOLD button.
Put the detergent/softener in proportion to the water level
and then close the lid.
•
Slightly dry the laundry at the last to avoid
wrinkles.
•
Cold water only be selected.
•
Use neutral detergent
•
Spinning into a side together or spinning the
washer board only prevent the damage on
the laundry.
5
START/
POWER
HOLD
START/
POWER
HOLD
Advertisement
Table of Contents
