Table of Contents
Advertisement
Recording a Programme with
Automatic Stop
This function enables you to record up to nine hours
(LP) of programmes. Your VCR stops automatically
after the requested length of time.
1
Switch on the television.
2
To monitor the programme being recorded, select
the television channel reserved for use with your
VCR (or the AV input if used).
3
Insert the cassette on which the programme is to
be recorded, with the window visible and the safety
tab intact or the opening covered with adhesive tape.
Result: The VCR is switched on automatically.
4
Select:
The station to be recorded using the PROG/TRK
❷
(
or
) / PROG (
or
The AV1, AV2 or AUX source using the INPUT
button for a satellite tuner or external video
source
Result: The station number is displayed and the
programme can be seen on the television.
With SV-M620K/SV-M80K, you can select the
recording speed (SP/LP). Press the SPEED button.
5
Hold the REC button down for a while to start
recording.
Result: The record indicator appears on the
television screen and VCR display. An
index is recorded on the tape (see page 25).
6
Press the REC button several times to increase the
recording time in:
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television
displays. The selected programme is
recorded for the length of time requested.
At the end of that time, the VCR stops
recording automatically.
7
If you wish to cancel the recording before the end,
press VCR STANDBY/ON (STANDBY/ON).
If the end of the tape is reached while recording:
The recording stops
The VCR automatically turns off
❷
or
) buttons
ENG-19
Using the Timer Programming
Feature
The Timer Programming feature allows you to preset
the VCR to record a programme up to one month
before that programme is to be broadcast. Up to six
programmes can be preset.
Before presetting a recording, check that the
date and time are correct.
1
- Insert the cassette. Press the TIMER button.
Press the
or
❷
buttons to select the
STANDARD option and then press the
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
PROG
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
TIMER PROGRAMMING
➛❿
OK
END:
❷
❿
2
Press
to select the input source.
3
Select the required station by pressing the
buttons or INPUT to select the AV1, AV2 or AUX
input sources.
1/JAN THU
PROG
PR
DAY
START
STOP
1
MO 1
12:00
12:50SP
--
----
--:--
--:----
--
----
--:--
--:----
--
----
--:--
--:----
--
----
--:--
--:----
--
----
--:--
--:----
➛❿
❷
DELETE:CLR/RST
❿
4
Press
to select the recording day.
5
Select the required day by pressing the
buttons.
❿
6
Press
to select the recording start time.
7
Select the required hour value by pressing the
or
❷
buttons.
❿
8
Press
to select the minutes.
9
Select the required minute value by pressing the
or
❷
buttons.
❿
10
Press
to select the recording end time.
❿
button or,
MENU
,
❷
21:28
MENU
or
❷
Advertisement
Table of Contents
