Choosing Your Language
You can change the language in which information is
displayed on the screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the LANGUAGE SET option.
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
LANG
LANGUAGE SET
➛❿
OK
END:
❷
3
Press the OK button to select this option.
Result: The LANGUAGE SET menu is displayed.
4
Select the required language by pressing the
❿
buttons.
5
Press OK to store the language selected.
6
Press MENU to exit the menu.
Result: From now on, all the on-screen information
will be displayed in the language selected.
➛
❿
,
or
,
buttons to
❷
MENU
➛
or
ENG-13
Setting the VCR Output
Setting the VCR Output
Channel
Channel
Your VCR output channel may need to be changed if
the pictures suffer from interference or if your TV
cannot find the pictures. Also, you can change the VCR
output channel to adjust the frequency in which
information is displayed on the screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
VCR OUTPUT CH option is selected.
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:K
VCR OUTPUT CH :CH36
❿
END:
❷
5
Select the required output channel (CH21~CH69)
➛
❿
by pressing the
or
6
On completion, press MENU twice to exit the
menu.
Then tune your television again (see page 11).
➛
❿
,
or
,
buttons to
❷
or
buttons, until the
❷
MENU
buttons.