Power Saver - Samsung LW15E33C Owner's Instructions Manual

BN68-00438D-02_en 6/11/03 7:12 PM
Troubleshooting: Before Contacting Service Personnel
On PC mode, image is not stable and
may appear to vibrate.
On PC mode, image is not centered
on the screen.

Power Saver

This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are "On", "Standby", "Sleep", and "Deep Sleep". PowerSaver operates with a
VESA DPMS compliant video card installed in your computer. You use a software utility installed on
your computer to set up this feature.
State
Horizontal Sync
Vertical Sync
Power Indicator
Power Consumption
This set automatically returns to normal operation when horizontal and vertical sync return.
This occurs when you move the computer's mouse or press a key on the keyboard.
Page 39
Check that the display resolution and frequency from your
computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
If the setting is not correct, use your computer utility programme
to change the display settings.
Your set supports multiscan display functions within the
following frequency domain:
Horizontal frequency -
Vertical frequency -
Maximum refresh rate -
Adjust the horizontal and vertical position.
Normal Operation
Active
Active
Green
LW15E33C : 48W (Max.)
LW17E34C : 58W (Max.)
15" : 30 ~ 69 kHz
17" : 30 ~ 81 kHz
56 ~ 75 Hz
15" : 1024 x 768 @ 75Hz
17" : 1280 x 1024 @ 75Hz
Power-Saving Function mode
(EPA/NUTEK)
Inactive
Inactive
Green, Blinking (1 sec interval)
Less than 3W
English-39