Power Saver - Samsung LT15E31S Owner's Instructions Manual

04-BN68-00438S-01Eng.qxd
Troubleshooting: Before Contacting Service Personnel
In PC mode, the image is not stable and
may appear to vibrate.
In PC mode, the image is not centred on
the screen.

Power Saver

This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are "On", "Standby", "Sleep", and "Deep Sleep". PowerSaver operates with a VESA
DPMS compliant video card installed in your computer. You use a software utility installed on your
computer to set up this feature.
State
Horizontal Sync
Vertical Sync
Power Indicator
Power Consumption
➣
This set automatically returns to normal operation when horizontal and vertical sync
are restored.
This occurs when you move the computer's mouse or press any key on the keyboard.
6/15/04 8:43 AM Page 47
All manuals and user guides at all-guides.com
N Check that the display resolution and frequency from your
computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
N If the setting is not correct, use your computer utility programme to
change the display settings.
Your set supports multiscan display functions within the
following frequency domain:
Horizontal frequency(kHz)
Vertical frequency(Hz)
Maximum refresh rate
N Adjust the horizontal and vertical position.
Normal Operation
Active
Active
Off
40W
30~69
50~75
1024
(at 75Hz)
Power-Saving Function mode
(EPA/NUTEK)
Inactive
Inactive
Red, Blinking (1 sec interval)
Less than 3W
768
X
English-47