Adjusting The Picture Settings; Channel Scan - Samsung CZ-21Q1MA Owner's Instructions Manual

Adjusting the Picture Settings

Your television has several settings which allow you to control picture
quality:
◆ Color Tone, Contrast, Brightness, Sharpness, Color,
Tint (NTSC only)
1
Press the MENU button.
Result: The "Picture" menu is displayed.
¦¤ ‹
2
Press the or button.
3 Press the ▲ or ▼ button to select the "Adjust", and then press the
‹
or button.
Result: When select the "Mode" to "Custom", the "Adjust" menu is
displayed.
4
To adjust the...
◆ Color Tone
◆ Contrast
◆ Brightness
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
5
When you are satisfied with the settings, press the
press the MENU button repeatedly to return to normal viewing.
➣
The television has an "automatic degaussing" system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the POWER
(ON/OFF) button on the front panel (refer to "Automatic
Degaussing to Remove Color Patches" on page 34.
➣
If you make any changes to the "Adjust" settings, the picture
standard is automatically switched to "Custom".

Channel Scan

Press CH.SCAN (Channel Scan button) for a 2 Second review of each
added channel. Press CH. SCAN key to exit Channel Scanning.
Press the...
¦¤ ‹
◆
or button.
Result: You select the required option
(Normal, Warm1, Warm2,
Cool1, Cool2).
¦¤ ‹
◆
or button.
Result: The horizontal bar is displayed.
EXIT
Select
¦¤
Select
button or,
Select
Contrast Contrast
Picture
¦ ‹
Mode Custom
Mode Custom
‹
Adjust Adjust
Size : Normal
Digital NR : Off
Size : Normal
tu
Enter Exit
Picture
Adjust
Color Tone : Normal
Color Tone : Normal
Contrast Contrast 100 90
Brightness Brightness 50 50
Sharpness 50
Sharpness 50
Color 50
Color 50
tu
Adjust Exit
Picture
Adjust
Color Tone : Normal
Color Tone : Normal
Contrast Contrast 100 90
Brightness Brightness 50 50
Sharpness 50
Sharpness 50
Color 50
Color 50
tu
Adjust Exit
100 91
19
ENG