Programming The Order Of Cd Playback - Samsung MAX-ZJ650 Instruction Manual

Programming the Order of CD Playback

(This function is not available during playback of an MP3-CD.)
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
1
If the CD function is selected, stop the player by pressing
2
Load the selected CDs.
3
Press PROGRAM.
Result: The following indications are displayed:
(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)
4
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
5
Select the required track by turning the MULTI JOG knob:
To the left to move back through the tracks
To the right to move forward through the tracks
6
Press PROGRAM to confirm your selection.
Result: The selection is stored and
7 To select other tracks, repeat Steps 4 to 6.
8
Press CD ( ) to listen to the track selection in the order
programmed.
9
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
10
To cancel the selection, press
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the /
tracks in step 5, 9.
You can also use the PROGRAM/SET button on the remote
control to instead PROGRAM button on the front panel in
step 3, 6.
.
is displayed.
Turn the MULTI JOG knob...
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the
left
.
buttons to select the required
4
8
3,6
1,10
GB
5,9
15