Medley Play; Repeating One Or All Tracks On The Compact Discs; Function To Skip Through 10 Track At A Time; Last Memory Function - Samsung MAX-T55 Instruction Manual

Medley Play

(This function is only available during playback of a CD.)
GB
You can select "MEDLEY ON"and "MEDLEY OFF"during
playback of a CD.
1
Press the MEDLEY button once.
Result: "MEDLEY " is displayed.
The interval time between the tracks can be shorten.
2
Press the MEDLEY button again.
Cancel this function,return to normal playback.
Repeating One or All Tracks
on the Compact Discs
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
1
To repeat... Press CD REPEAT on the Remote
control once or more times
until...
REPEAT 1 is displayed
The current track indefinitely
REPEAT 1 CD is displayed
The selected disc
All discs loaded REPEAT ALL CD is displayed
2
When you wish to stop the Repeat function, press CD REPEAT until
ALL CD or 1 CD is displayed, or press .
AI SLEEP SHUFFLE CD REPEAT
1,2
MO/ ST DEMO DIMMER
REC / PAUSE TAPE 1/2 COUNTER RESET
TAPE
2
MP3-CD / CD
12
Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD and MP3-CD. The track 10 tracks after the current
one will then be played back.
Example: If you want to select track 43 during playback of track
5, press the +10 button four times, and then press
the button three times .
5 10 20 30 40 41 42
MP3-CD / CD
MUTE
TUNING/
VOLUME
ALBUM
TUNING
SURROUND MODE SOUND MODE
MODE
+10
+10

Last Memory Function

(This function is only available during playback of MP3-CD.)
When MP3-CD playback is selected again after your CD
player has been stopped or turned off, this function allows
playback from the start of the track that you last listened
to.
Press the Program button while your MP3-CD is being played .
The LAST ON and LAST OFF may be repeatedly selected.
Programming the Order of CD Play-
back
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
43
1
If the CD function is selected, stop the player by pressing
2
Load the selected CDs.
3 Press PROGRAM.
Result: The following indications are displayed:
(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)
4
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
5
Select the required track by turning the MULTI JOG knob:
To the left to move back through the tracks
To the right to move forward through the tracks
6
Press PROGRAM to confirm your selection.
Result: The selection is stored and
7
To select other tracks, repeat Steps 4 to 6.
8
Press MP3-CD/CD ( ) to listen to the track selection in the order
programmed.
9
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
10
To cancel the selection, press .
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the /
tracks in step 5, 9.
8
1,10
.
5,9 5,9
is displayed.
Turn the MULTI JOG knob...
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the
left
buttons to select the required
GB
4
3,6
5,9
13