Connecting yepp to PC
System
Before connecting yepp to PC, make sure to install
Requirements.
USB driver. If "Add New Hardware Wizard" appears,
press the [Cancel] button and install USB driver.
The PC system must meet the
following specifications:
Pentium 133MHz or greater
Windows 98 SE/ME/2000/XP
40MB of available hard disk space
CD-ROM drive
(double speed or greater)
USB port (1.1) supported
VGA graphic
DirectX 8.0 or above
12
Installing software
1
Insert the Installation CD into CD-ROM drive.
The picture shown below appears.
Select [USB Driver Install].
2
Choose the language you wish to use.
3
Click [Next] in the series of windows
that appear.
Continued...
13