Sports function support encoding function removable storage device 3d surround sound mp3 & wma playback fm reception 15-hour continuous play (40 pages)
Contents Additional Usage Preparations Loop Repeating Safety Instructions Setting SRS Features MENU Mode Components Selecting the Play Mode Location of Controls (yepp) Selecting the EQ Mode Selecting the Play Folder Managing Files Connection to Computer Deleting Formatting Connecting yepp to PC Setting the Advanced Functions Manual Installation of USB Driver DISPLAY...
Safety Instructions Read and understand all the instructions to avoid injury to yourself and damage to the equipment. Earphones Do not expose to extreme temper- Do not apply excessive pressure Do not let any foreign matter atures (above 95°F or below 23°F). to the device.
Page 4
Touchpad operation Featuring an Encoding Function You can easily operate the functions you want by using the touchpad. You can make a MP3 file out of an source using the ENC jack on the main unit. You can also convert an FM radio program into an MP3 file in real time. MP3 &...
Components Voice Recording Function You can do a Voice Recording with high quality and use it for a conference. Earphones USB Cable Player User manual Sound You can adjust equalizer manually. Battery (AAA/LR03 type) Neck Strap Carrying case Line Cable Installation CD 20-Hour Continuous Play Model...
Connecting yepp to PC System Before connecting yepp to PC, make sure to install Requirements. USB driver. If “Add New Hardware Wizard” appears, press the [Cancel] button and install USB driver. The PC system must meet the following specifications: Pentium 133MHz or greater Choose the language you wish to use.
Page 8
Go to the device manager to check that installation has been successfully completed. When USB driver is not Installed automatically, refer to next page. Upon installation of the USB driver "SAMSUNG YP-780" will appear in the [System Properties] [Device Manager].
Manual Installation of USB Driver Go to “Downloading/Uploading files” if the USB driver is in place. Follow these steps if the USB driver is not in place : Check the device manager. After selecting the driver, click on [Update Driver]. Windows 98,ME: Control Panel System...
Page 10
Manual Installation of USB Driver In Windows 98 Click [Next] button in the series of windows that appear. Select [Specify a location] and then select [CD-ROM]/driver for win98. You must reboot your computer to complete the installation.
Using the removable storage Downloading/Uploading files Disconnecting the USB cable After completing the file transmission, you must disconnect the cable in the following way: Connect the yepp to your PC and turn it on. Double-click on the green arrow in the taskbar on the bottom right of the window.
Installing yepp Studio Insert the Installation CD into CD-ROM drive. Click [Next] in the series of windows that appear. Select [yepp Studio]. Please refer to Help for more information on how to use yepp Studio. Select language...
To View Help on yepp Studio Run yepp Studio and press F1. Help will appear. Music recognition technology and related data are provided by Gracenote and Gracenote CDDB® Move the arrow to the top of yepp Studio and right click on the mouse. Music Recognition Service The following selection window will appear.
Installing yepp WAV Converter Insert the Installation CD into CD-ROM drive. Click [Next] in the series of windows that appear. Select [yepp WAV Converter]. Select language...
Convert WAV File Press [yepp WAV Converter] in the Desktop to display WAV Converter window. To Play File To open the Voice file you want to convert To convert the Voice file to the WAV file. To delete the file opened in WAV Converter window To check the version information When the WAV Converter window appears, press the [Open] button to select the To close the WAV Converter...
Adjusting the Volume/Hold Function Playing Music and Turning Off the Device First insert batteries and connect the earphone correctly. Adjusting the Volume Pausing Music Playing Music Move the buttons to adjust the volume. (Power On) (Power Off) 0 0 : 0 1 : 3 0 0 0 1 Turn on the power by pushing up the power Pause playback by pressing the...
Changing Modes Recording Voice Press the button briefly while the player is stopped. Press the button to start vioce recoding while the player is stopped. Move to the mode you want by using the buttons, If the button is pressed again, the recording is stopped and the voice file is saved. and then press the button.
Encoding MP3s Connect the Audio Output port on the external audio source (or the Line Out port) If the button is pressed during encoding, the encoding stops and an encod- to the ENC port on the device with the Line in cable. ing file is created.
Searching for Music/Voice Files To search for specific parts during play : To change tracks during play: To change tracks when stopped: VBR(Variable Bit Rate) file: MP3 file whose compression rate changes A desired part can be searched for by pressing and If the button is pressed during play, the next If the...
Listening to FM Radio While the player is stopped, select FM Mode by using the button. Manual Search for a Frequency Automatic Search for a Frequency Searching Stored Frequencies Press the buttons to search manually for Press and hold the buttons in order to search for and stop at the desired frequency.
Encoding From FM Radio Loop Repeating Press the button during FM reception. Starting Point Ending Point Encoding of the currently transmitted FM broadcast begins. 00 : 00 : 50 While playing music files, press the Press the button briefly FM000001. MP3 button briefly at the begin- again to set the end of the loop.
Setting SRS MENU Mode To switch to Menu Mode, press and hold the button while in Music/Voice Mode. Press the button in Music mode to select the desired SRS mode. After moving with the buttons, press the button to select the desired menu. Menu mode is cancelled if the button is pressed.
Selecting the EQ mode Selecting the Play mode Select EQUALIZER in the MENU. (refer to “MENU Mode”) Select PLAY MODE in the MENU. (refer to “MENU Mode”) Use the buttons to move to the setting you Use the buttons to move to the mode you want (out of the 4 settings) and press the button to select.
Managing Files Selecting the Play Folder Select Folder Play in the MENU. (refer to “MENU Mode”) Deleting : This signifies the root folder; the files in the folder are played if the Menu button is pressed. : This signifies the sub-folders of the Music folder; only the files in the selected sub-folder Select FILE in the MENU.
Setting Advanced Functions Select SETTING in the MENU. (refer to “MENU Mode”) Formatting Use the buttons to move to the function you want to change and select Select FILE in the MENU. (refer to “MENU Mode”) the function by using the button.
DISPLAY Select DISPLAY in the MENU. CONTRAST INFORMATION Use the buttons to set the Contrast. Use the buttons to select the music mode and select the content to be displayed The setting range of the contrast, which adjusts the CONTRAST at the top of the Screen Display Window.
SOUND CONTROL Select SOUND CONTROL in the MENU. ENCODE BIT RATE WOW LEVEL Use the buttons to sel the desired MP3 encoding bit rate. ENCODE BPS The levels of SRS and TRUBASS can be adjusted. You can set the desired bit rate to 64kbps, 96kbps or 128kbps buttons to select the level you want.
TIME CONTROL Setting the FM Frequency Unit Select TIME CONTROL in the Menu. You can set the unit of frequency movement in FM mode. INTRO TIME Select FM STEP in the MENU. Use the buttons to set the INTRO TIME. INTRO TIME The intro play time can be set from 10 to 50 seconds.
MENU Table MENU PLAY MODE EQUALIZER FOLDER PLAY FILE SETTING EXIT NORMAL FOLDERS DISPLAY INFORMATION NORMAL DELETE BACK LIGHT CLASSIC . . . CONTRAST REPEAT ONE JAZZ SCROLL SPEED EXIT ROCK LANGUAGE FORMAT CONFIRM REPEAT ALL EXIT NORMAL DBB CANCEL SOUND CONTROL WOW LEVEL CLASSIC DBB...
Troubleshooting The software doesn’t work The buttons do not work. Check setting of Hold switch. Refer to the recommended PC specifications. yepp keeps being turned off. yepp does not work and the LCD displays nothing. In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings). Check the battery capacity Check to see if there are files saved in it.
Specifications MEMO Model YP-780 Built-in Memory capacity 1GB(YP-780 Z)/512MB(YP-780 X)/256MB(YP-780 V)/128MB(YP-780 H) Voltage 1.5V x 2 (AAA/LR03 size alkaline battery) Playing time lasts up to 20hours (Alkaline battery, MP3 128Kbps, Vol level 30) Dimensions/Weight 45 x 73 x 17.5mm/45g (without battery) Case Plastic/Aluminum Noise Ratio...