Using The Timer Programming Feature; Checking A Preset Recording - Samsung SV-DVD6E Instruction Manual

VCR

Using the Timer Programming Feature

GB
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
TIMER METHOD
STANDARD
SHOWVIEW
1
RETURN ENTER
" ❷
2
3
1/JAN TUE 12:09
4
PR DAY START STOP V/P
1 SA 9 12:00 12:50SP -
-- ---- --:-- --:---- -
5
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
6
-- ---- --:-- --:---- -
➛❿ ❿
" ❷ SET:
7
RETURN DELETE:CLEAR
8
9
10
11
12
17
1 2 3
13
4 5 6
14
15
16
17
34
Before presetting a recording, check that the date and
time are correct.
Insert the cassette and press TIMER on the remote control.
Result: The timer selection is displayed.
Press the ENTER button to select STANDARD option.
Result: The TIMER PROGRAMMING menu is displayed.
Press ❿!!to select the input source.
Select the required station by pressing the , buttons or
" ❷
INPUT SEL. to select the AV1, AV2 or AUX input sources.
Press ❿ to select the recording day.
Select the required day by pressing the or buttons.
" ❷
Press ❿ to select the recording start time.
Select the required hour value by pressing the or buttons.
" ❷
Press ❿ to select the minutes.
Select the required minute value by pressing the or buttons.
" ❷
Press ❿ to select the recording end time.
Select the required recording end time by pressing the or
" ❷
buttons, following the same procedure as when selecting the
recording start time.
Press ❿ to select the recording speed.
Press the or buttons to select the SP (Standard Play),
" ❷
(Long Play), (Auto Tape Speed Select) recording speeds.
AUTO
Press the or buttons to toggle between the VPS or PDC
" ❷
mode (marked ON ) and the non-VPS/PDC mode (marked - ).
When you have finished, press the RETURN button.
Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.

Checking a Preset Recording

You can check your preset recordings:
When you have finished presetting the DVD-VCR
If you have forgotten which programmes will be
recorded
1 Press TIMER on the remote control.
Result: The timer selection is displayed.
2
Press the ENTER button to select
Result: The TIMER PROGRAMMING
3
Press the or buttons to select the required programme.
" ❷
4 Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
5 On completion, press RETURN twice.
Cancelling a Preset Programme
You can cancel any programmes that are:
Incorrect
LP
No longer required
1 Press TIMER on the remote control.
Result: The timer selection is displayed.
2
Press the ENTER button to select
Result: The TIMER PROGRAMMING
3 Select the programme to be cancelled by pressing the
buttons.
4 Press the CLEAR button to cancel the selected programme.
Result: All the recording information is deleted and the broad-
cast will not be recorded.
5 On completion, press RETURN twice.
1/JAN TUE
PR DAY START STOP V/P
1 SA 9 12:00 12:50SP -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
STANDARD option.
➛❿
" ❷
menu is displayed.
RETURN DELETE:CLEAR
1/JAN TUE
PR DAY START STOP V/P
1 SA 9 12:00 12:50SP -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
STANDARD option. -- ---- --:-- --:---- -
menu is displayed. ➛❿
" ❷
RETURN DELETE:CLEAR
or
" ❷
35
VCR
GB
12:09
VCR
12:09
4