Presetting The Stations Manually - Samsung DVD-VR300 Instruction Manual

Presetting the Stations
Manually
If you have already set then automatically, you do not
need to preset the stations manually.
Open "MENU"
1
With the DVD in Stop mode, press the MENU
button.
2 Select "Setup"
❷
Using the buttons, move the selection bar
to "Setup" then press
3
Select "Install"
❷
Using the buttons, move the selection bar
to "Install", then press
Select "Manual Setup"
4
Move the selection bar to "Manual Setup", using
❷
the buttons then press
select.
TV System
Programme
❿
or OK button to select.
❿
or OK button to select.
❿
or OK button to
: G
: Ch 36
❷
Press the buttons to select a PR number
5
as required then press
❷
Press the button to select Edit.
6
❿
Then press or OK button to be displayed
"Manual Setup" menu.
Manual Setup
PR 01
CH - - -
Name - - - -
- - - - - -
MFT
Done
➛ ❿
Press the buttons to start scanning the
7
channels.
The frequency band is scanned and the first
station found is displayed.
❷
Press the buttons until the NAME is select-
8
ed. The station name is set automatically from
the broadcast signal.
To change the programme's name, press the
9
button. The first letter of the name flashes.
Manual Setup
PR 01
2
CH
A - - -
Name
- - - - - -
MFT
Done
❿
or OK button to select.
Edit
Delete
Swap
❿
English - 27