Basic Tv Tuner Operations; On-Screen Menu Navigation; Menu Language - Samsung DVD-V2000 Instruction Manual

00006A DVD-V2500/XAC-Eng2 11/12/02 7:05 PM

Basic TV Tuner Operations

1
3
4 2
5
2

On-Screen Menu Navigation

The Setup Menu is the opening
screen of the on-screen menu
system
2
2 2
1 , 3
2
4
16
Page 16
The following buttons are used when watching television via the
DVD-VCR's built-in TV tuner.
1 TV/VCR
Press to switch between your TV's tuner and the VCR's internal
tuner.
2 Channel Up/Down
Press to change to the next or previous channel.
3 0-9 Buttons
Press to select channels directly.
4 100+ Button
Press to select channels 100 and higher. First, press the 100+
button, then press the remaining digits using the 0-9 buttons.
5 Display
Press to display the channel you are watching.
• Also works in DVD and VCR mode.
The on-screen menu system allows you to set all functions for your
DVD-VCR. The following buttons are used to open and navigate
through the on-screen menu system.
1 SETUP Button
With the DVD in stop mode, press to access the DVD-VCR on-
screen menu system.
2 Up/Down and Left/Right
Moves menu selection cursor up, down, left and right to cycle
through menu options
3 ENTERButton
Press to confirm settings in certain menus.
4 RETURNButton
Returns to the last menu viewed or exits the menu system.

Menu Language

Follow these steps to change the on-screen menu language to
English, French or Spanish.
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Set "Language"
Using the Up and Down buttons, move the selection arrow to
"Language/Idioma/Langue," then press the ENTERbutton.
3 Set menu Language
Move the selection bar to your desired Language, then press the
ENTER button.
1
English Setup Menu
17