Description - Samsung DVD-HD850 Manual

DVDHD850 XSS-00_Eng1 13/01/2005 8:21 Page 8
S
E T U P

Description

Front Panel Controls
DVD-HD850
1 2
1. STANDBY/ON ( )
When the unit is first plugged in, the indicator lights.
When STANDBY/ON is pressed on, the indicator goes out
and the player is turned on.
2. DISC TRAY
Place the disc here.
3. OPEN/CLOSE ( )
Press to open and close the disc tray.
4. DISPLAY
Operation indicators are displayed here.
5. EZ VIEW
The aspect ratio of a picture can easily be adjusted to
your TV's screen size (16:9 or 4:3).
Front Panel Display
1 2
1. Disc type indicators
2. Play / Pause
9 10
OPEN/CLOSE
EZ VIEW
3 4 5 6 7 8
6. STOP ( )
Stops disc play.
7. REMOTE CONTROL RECEIVER
8. SKIP ( ) / SEARCH
Use to forward skip a scene or music.
9. SKIP ( ) / SEARCH
Use to reverse skip a scene or music.
10. PLAY/PAUSE ( )
Begin or pause disc play.
3
3. Displays various messages
concerning operations such as PLAY,
STOP, LOAD ...
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc information.
ENG-8
S
E T U P
Rear Panel
1
1 3
1. DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P , P and Y video.
R B
- If Component(P-SCAN) Video Output is selected in
Setup Menu, progressive scan mode will work.
- If Component(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
3. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the
TV's menu system.
- If Component (P-SCAN) & HDMI Video Output is selected in Setup Menu, Video and S-Video Outputs do
not work.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 52 ~ 54 to get more information on how to use the setup menu.
ENG-9 ENG-9
2
4 5 6
4. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
S-Video.
5. S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
- The Video Output in Setup Menu must be set to
S-Video.
6. HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically a maximum of 10
seconds later.
- If you want to use a Video, S-Video or Component
Output, unplug DVI cable.