Presetting The Stations Automatically - Samsung CHT-200 Instruction Manual

Hide thumbs Also See for CHT-200:
Table of Contents

Advertisement

VCR
GB
INSTALLATION
RETURN
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
RETURN
YOUR DATA WILL BE LOST
PRESS
ENTER
RETURN
PLEASE WAIT
I--------------------I
RETURN

Presetting the Stations Automatically

MAIN MENU
➛ ❿
ENTER
INSTALLATION
:G
:CH36
ENTER
TO CONTINUE
TO EXIT
AUTO SET UP
2%
20
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
Automatically
Manually (see page 21)
You can store up to 80 stations.
1
Press the MENU button on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
INSTALLATION
option.
3
Press the ENTER button to select this option.
Result:
The
INSTALLATION
4
Press the corresponding
option is selected. And then press the ENTER button to select this
option.
5
Press ENTER to start the auto scanning.
Result:
The
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 22).
or ➛, ❿ buttons to select the
,
menu is displayed.
or
buttons, until the
PLEASE WAIT
indication flashes on the
AUTO SET UP

Advertisement

Table of Contents
loading

Table of Contents