Presetting The Stations Manually; Clearing A Preset Station - Samsung DVD-V80 Instruction Manual

VCR

Presetting the Stations Manually

You do not need to preset the stations manually if you
have already set them automatically.
1 After pressing the MENU, press the OK or ❿ .
Language : English
Result:
Install
User Set 2
Press the corresponding
Auto Power Off : Off
option.
Screen Messages : On
3 Press the OK or ❿ to select this option.
Result:
4 Press the corresponding
Setup
5 Press the OK or ❿ to select a
Install
Result:
Auto Setup
Manual Setup
6
Press the
TV System : G
required.
VCR Output CH : CH 36
7 Press the ❿ button to preset the station.
Result:
8 Press the ➛ or ❿ buttons to start scanning channel.
Result:
9 Press the
The station name is set automatically from the broadcast signal.
TV STATION TABLE
10 To change the programme's name, press the ❿ button.
PR CH NAME
Result:
1
2
11 To...
3
4
Select a character
5
in the name
SWAPPING : OK
DELETE : CLEAR RETURN
Move to the next or
previous character
12
If you...
Wish to store the
MANUAL TUNING
station displayed
PR :
CH : - - -
MFT : -
NAME : - - - -
Do not wish to
store the station
MEMORY : OK
RETURN
displayed
13
Repeat this procedure from Step
stations have been stored.
14
On completion, press the RETURN button three times to exit the
menu.
22
The Setup menu is displayed.
, buttons to select the Install
❷
The Install menu is displayed.
or buttons, until the Manual
❷
option is selected.
Manual Setup option.
The TV STATION TABLE menu is displayed.
or buttons to select a programme number as
❷
The MANUAL TUNING menu is displayed.
The frequency band is scanned and the first station
found is displayed.
or buttons until the NAME is selected.
❷
The first letter of the name flashes.
Then...
Press the or button until the
❷
required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
respectively.
Then...
Press the or buttons until the MFT
❷
is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station
Press the or buttons until the CH
❷
is selected.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
14
Go back to the beginning of Step
6
onwards, until all the required

Clearing a Preset Station

If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , buttons to select the
❷
option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4
Press the corresponding or buttons, until the
❷
option is selected.
Setup
5 Press the OK or ❿ to select a Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
6
Press the corresponding or buttons, until the required preset
❷
TV station (PR) is selected.
7
Press the CLEAR button.
8 6
Repeat the same procedure from Step onwards until all the
required stations have been cleared.
9
On completion, press the RETURN button four times to exit the
menu.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Install
Auto Setup
Manual Setup
TV System : G
Manual
VCR Output CH : CH 36
TV STATION TABLE
PR CH NAME
1 21
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
23