Recording A Programme With Automatic Stop - Samsung CHT-500 Instruction Manual

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4
Select:
The station to be recorded using the PROG ( or ) buttons
or
The AV1, AV2 or AUX source using the INPUT SEL. button
for a satellite tuner or external video source
Result: The channel number is displayed and the
programme can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
6
Hold the REC button ( ) down for a while to start recording.
Result: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 39).
7
Press the REC button ( ) several times to increase the
recording time in:
30-minute intervals up to four hours
1-hour intervals up to nine hours
Result: The length is displayed on the television displays.
The selected programme is recorded for the length of
time requested. At the end of that time, the DVD-
VCR stops recording automatically and power off.
8
If you wish to cancel the recording before the end, press
STANDBY/ON.
If the end of the tape is reached while recording:
The recording stops and power off.
This function is not available in DVD recording
VCR
STANDBY/ON PHONES SELECT
REC S.MODE COPY PROG P.SCAN
3
4
4
6
5
LENGTH 2:30
SET LENGTH :
PRESS REC
GB
EJECT
VOL
31