Presetting The Stations Automatically - Samsung CHT-500 Instruction Manual

Presetting the Stations Automatically

You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner.
This can be done:
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 20)
You can store up to 80 stations.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3 Press the OK or ❿ to select this option.
Result: The Install
4
Press the corresponding
is selected.
And then press the OK or ❿ to select this option.
Result: A message appears, indicating that any channels
already preset on your VCR will be deleted.
5
Press OK to start the auto scanning.
Result: The
Please Wait
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second
station and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
Once the auto scanning procedure has finished,
some stations may have been stored more than once;
select the stations with the best reception and delete
the ones no longer required (see page 21).
, buttons to select the
" ❷
menu is displayed.
or buttons, until the Auto Setup
" ❷
indication highlight on the
Install
Your data will be lost
Press OK to continue
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
Auto Setup
Menu to exit
Auto Setup
Please Wait
15%
19
GB