Making Intercom; Adjusting Ring Volume For Remote Set - Samsung SP-C801RBL Manual

Adjusting ring volume
for Remote set
Selecting a ring type
1 �
On the screen is
displayed 1, 2 or 3
You can set between low and high.
● The default setting is high.
Adjusting the ring volume
▼
To reduce :
To increase :
Adjusting the handset receiving volume (during a call)
You can adjust the voice to either high, medium or low.
To reduce :
To increase :
16
● There are 3 different kinds of ring types.
You can hear It will return to
the selected standby mode
3
2
�
ring type. after a beep
sound.
Select the
number you
want.
To do so, do the following.
� � �
● Press in the above order
� � �
● Press in the above order
�
�
When adjusting the volume, you can
check out the change of volume
from the bar graph on the screen.

Making intercom

● Separate from external calls, you can make intercom between the handset or speakerphone of the base
set and the Remote set. In this particular case the calls are not charged.
Calling from to
(press the following buttons in order)
1
Press the number of the
Remote set.
∙Press the Intercom button
● If you press
in standby mode.
any button for 2 seconds, all Remote
sets will then begin to ring.
Calling from to
(press the following buttons in order)
1
∙Press the Intercom button
in standby mode.
When an external call is coming during an internal call, it will not ring. However, if you happen to
hear the ringing coming from the additionally registered Remote set, then you may end the internal
call and receive the external call.
2 3
When you hear the bell and
press button from the
Remote set, the call will be
connected with the speaker
, or do not press
phone in the base set.
● You can switch to the handset in
the base set by picking up the
handset.
2
When you hear it ringing, press button
from the base set, the call will then be connected
to the Remote set.
● You can switch to the handset in the
base set by picking up the handset.
17