Wireless Network Setup Using the Wireless LAN Setup
Program.
You can use a wireless LAN by using a wireless LAN configuration program (PROSet)
provided separately.
To use wireless network connection, complete the following procedures.
Step1. Install the wireless LAN configuration program (PROSet).
Step2. Configure wireless network settings through the wireless LAN configuration
program.
■ Step 1. Installing the wireless LAN configuration program (PROSet)
You can install the wireless LAN client administrator program following the
instruction displayed automatically when you insert the system software CD. Insert
the system software CD into the CD-ROM drive, and install the wireless LAN
configuration program.
■ Step 2. Using the wireless LAN configuration program (PROSet)
Double-click the wireless LAN program (
(Or, click Start > All Programs > Intel PROSet Wireless > Intel
PROSet Wireless.)
N
o
t
e
N
o
t
e
In some languages, some buttons on the window may not be displayed. If this is
the case, resize the window to use the program.
Configure wireless network settings in PROSet following the procedures below.
• To connect to an Access Point
To connect to an access point or existing computer-to-computer (Ad Hoc)
network, refer to the following procedures. (To create a new computer-to-computer
network, refer to the following To create computer-to-computer
(Ad Hoc) network section.)
) icon on the taskbar.
Chapter 4. Connecting to the Internet
4-17