Table of Contents
Advertisement
■
■
C
a
C
a
3-8
Manual
Step 2. Configure digital sound output on the computer
1. Click Start > Control Panel > Sounds, Speech and Audio
Devices > Sounds and Audio Devices.
2. In the Device volume field on the Volume tab, click Advanced.
3. In the [Master Volume] dialog, click Option > Advanced Controls.
Then Advanced button is displayed on the bottom of the dialog.
4. Click Advanced, select "AC3 SPDIF", then click Close.
Step 3. Enable S/PDIF on the DVD program
When using 5.1 channel speakers, you need to install the Power DVD
program from the DVD Installation CD separately supplied
and then change the settings as directed in these steps:
1. Run Power DVD and click the Settings button.
2. On the Audio tab, set the Output setting to 'Use SPDIF Output'.
Now, you can enjoy home theater using DVD titles.
u
t
i
o
n
u
t
i
o
n
To control volumes for your 5.1 channel speaker, use the control on the digital
amp. (Please, refer to the speaker manual.)
Hide quick links:
Advertisement
Table of Contents
