Inserting And Ejecting A Cassette - Samsung VP-D530 Owner's Instruction Book

ENGLISH
Preparation

Inserting and Ejecting a Cassette

✤ When inserting a tape or closing a cassette holder, do not apply
excessive force. This may cause a malfunction.
✤ Do not use any tapes other than Mini DV CASSETTES.
1. Connect a power source and slide the TAPE
EJECT switch (on the bottom of the
camcorder) and open the cassette door.
- The cassette holding mechanism rises
automatically.
2. Insert a tape into the holder with the tape
window facing outward and the protection
tab toward the top.
3. Press the area labelled PUSH on the
cassette holding mechanism until it clicks
into place.
- The cassette is loaded automatically.
4. Close the cassette door.
- Close the door completely until you can hear a "click".
Note
I
When you have recorded something that you wish to
keep, you can protect it so that it will not be
accidentally erased.
a. Protecting a tape :
Push the safety tab on the cassette so that the hole is
uncovered.
b. Removing the tape protection :
If you no longer wish to keep the recording on the cassette,
push the write-protect tab back so that it covers the hole.
• How to keep a tape
a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c. Keep the tape in an upright position and avoid storing
it in direct sunlight.
d. Avoid dropping or knocking your tapes.
✤
✤
1 2
3 4
push
a.
a.
b.
b.
•
a.
b.
c.
d.
DV
1.
-
2.
3. push
-
4.
-
I
23 23