Demonstration - Samsung VP-D303 Owner's Instruction Book

ENGLISH ENGLISH
Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more
easily.
The DEMONSTRATION function may only be used in the
CAMERA mode without a tape inserted in the camcorder.
The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL and
push the MENU SELECTOR.
4. Select DEMONSTRATION from the submenu and
push the MENU SELECTOR.
5. To activate the DEMONSTRATION, set
DEMONSTRATION ON.
Press the menu button to quit the menu.
The demonstration will begin.
6. To end the DEMONSTRATION, set the
DEMONSTRATION to OFF.
Notes
The DEMONSTRATION function only works without a
TAPE installed.
The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAMERA mode (no tape is inserted in the camcorder).
If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily
and resumes 10 minutes later if you do not operate any other functions.
While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
DEMONSTRATION
DEMONSTRATION
OFF
1.
2.
CAM MODE
INITIAL CLOCK SET
CAMERA WL. REMOTE
3.
A/V BEEP SOUND
MEMORY
SHUT. SOUND
INITIAL
VIEWER
LANGUAGE
4.
DEMO
5.
DEMONSTRATION
CAM MODE
INITIAL SET
6.
CLOCK SET
DEMONSTRATION
WL.REMOTE
BEEP SOUND
SHUTTER SOUND
LANGUAGE ENGLISH
DEMONSTRATION
DEMONSTRATION
DEMONSTRATION
FADE
EASY
DEMONSTRATION
NIGHT CAPTURE
DEMONSTRATION
CAMERA
DEMONSTRATION
CAMERA
MENU
MENU SELECTOR
DEMONSTRATION
MENU SELECTOR
DEMONSTRATION
MENU
DEMONSTRATION
CAM
10 DEMONSTRATION
BLC PHOTO
DEMONSTRATION
10
ON
DEUTSCH
ON
OFF
43 43 43