Maintenance; After Finishing A Recording - Samsung VP-D30 Owner's Instruction Book

ENGLISH

Maintenance

After finishing a recording

At the end of a recording you must remove the power source.
When recording with a Lithium Ion Battery Pack, leaving the pack on the
camcorder can reduce the life span of the battery. Hence, it should be
removed from the camcorder.
1. Slide the TAPE OPEN/EJECT switch in the
direction of the arrow.
Opening the cassette door ejects the tape
automatically.
Please wait while the tape is completely
ejected.
2. After removing the tape, close the door and store
the camcorder in a dust free environment.
Dust and other foreign materials can cause square-shaped noise or
jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
Hold down the BATTERY RELEASE button and slide the battery
pack in the direction of the arrow.
2
1
3
3.
4.
1. TAPE OPEN/EJECT
2.
OFF
BATTERY RELEASE
/
99 99