Samsung VP-D11 Owner's Instruction Book page 70

ENGLISH
IEEE 1394 Data Transfer
System requirement
®
CPU : faster Intel Pentium III
Operating system : Windows
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
Recording with DV connecting cable (VP-DXX
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) to the DV IN/OUT port of camcorder and
to the DV IN/OUT port of the other DV device.
Make sure DV IN appears on the screen.
3. Press the START/STOP button to enter the REC PAUSE mode.
PAUSE is displayed in the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording for a while, press the START/STOP button again.
6. To stop recording, press the
Reference When using this camcorder as a recorder, the pictures on a monitor may be uneven, however recorded pictures are not affected.
70
TM 450Mhz compatible
®
98SE, ME, XP, Mac OS
i only)
(STOP) button.
(Not Supplied)
6Pin 4Pin
IN/OUT (Not Supplied)
DV port linking diagram