Service Setup; Add New Services 27; Reinstall All Services; Test Reception - Philips DTR500/05 User Manual

Digital terrestrial receiver
Table of Contents

Advertisement

NOTICE DTR 500.qxd
- Scroll to the station you want to listen to.
Note: press <OK> to uninstall the selected station. Press
<OK> again to cancel uninstallation.
- Press
u
to exit the screen and return to the Service lists
sub-menu, or press the blue colour button to exit the
menu.
7.3.2

Service setup

This item is used to install services.
7.3.2.1 Add new services
This feature is used to install new available services.
- Press
enable the installation feature.
i
- Press <OK> to start searching for new services.
Note: to interrupt the search, press <OK>. No services
are stored.
Once the search has been completed, the total number of
services found is displayed on the right-hand side of the
screen.The Puck moves to the Store button.
- Press <OK> to store the new services.
- Alternatively, scroll down to the Discard button and press
<OK> to discard the new services.
Note: before storing/discarding the services found, you may scroll
up to view the search results respectively for
channels/stations/other services.
- Press
to exit the screen and return to the Service
u
setup sub-menu, or press the blue colour button to exit
the menu.

7.3.2.2 Reinstall all services

This feature is used to reinstall all services, overwriting the
previous service settings.
- Press
to enable the reinstallation feature.You are then
i
prompted to confirm you want to reinstall al services.
- Press <OK>, then proceed as described above.
7.3.3

Test reception

This feature is used to help you position your antenna and
check the availability of signals on specific RF channels.
7/09/2004
15:25
Page 27
CHANGE THE SETTINGS OF YOUR RECEIVER 27

Advertisement

Table of Contents
loading

Table of Contents