Placing And Ending Calls - Motorola T8160 Manual

Tip:
æ
If you press
ª
(or ) with-
out entering a
number, your
phone will dial
the last number
entered.
28

Placing and Ending Calls

Placing a Call
1. Open
Phone
2. Enter
Number
Correct
Errors
3. Place
Call
You can dial phone numbers with up to 32 digits, but only the
last twenty-four digits will appear in the display.
Your phone will display the first 24 digits, then a second screen
will show the digits remaining in the phone number.
Ending a Call
There are three ways to end a call:
Close
or Press Key Press
or Hold
Smart
Button
Open the phone to expose the keypad.
If necessary, press
Enter the number you want to call,
for example: 555-1212.
Ç
Press to erase one digit at a time if you
make a mistake. Press and hold
the entire entry and start again.
æ ª
Press (or
or
A A A A
Press and hold
You will see: Calling 555-1212.
‰
Press to see the rest of the number.
Close the phone to end a call.
º
.
A A A A
Press and hold
You will see: Press § to End Call.
A A A A
Press again to end the call.
¡
to turn the phone ON.
Ç
) to place the call.
until you hear a high tone.
until you hear a high tone.
to erase