Table of Contents
Advertisement
Your ringer/keypad volume can be made silent! If
the display shows 5
sound and your keypad will not emit tones. The
display will flash CR
incoming call.
Adjusting Earpiece Volume
Earpiece volume can only be adjusted while you
are in a call. Press and hold VOL to raise the
earpiece volume level. Press and hold VOL again
to lower the earpiece volume.
Adjusting Ringer and Keypad
Volume
Ringer and keypad volumes can only be adjusted
when you are not
in a cd.
to raise the ringer and keypad volume levels.
Press and hold VOL again to lower the ringer and
keypad volume levels.
Your ringer/keypad volume can be made silent! If
the display shows 5
sound and your keypad will not emit tones. The
display will flash 1: R
to alert you of an
incoming call.
Selecting Ringer Tone
Your phone offers nine different ilnger styles from
which to choose. Make sure your ringer volume is
not set at 5
the ringer tones!
22
to alert you of an
Press and hold VOL
To Change Ringer Tones
1. Press FCN, then 8. The display
Press and release any number key,
from 1
corresponding distinct ringer tone
once. Press and hold any number
I
key, from 1 - 9, to repetitively
sound its distinct ringer tone. The
display will show r so 9 and the
corresponding ringer number. You
have six seconds to press and release
another number key to sound and
select another ringer style.
To help you remember which key to use to change
ringer tones, note that "RING" is printed on the 8 key.
Display Own Phone
Number
1. Press RCL, then #.
2. Your active phone number will be
displayed until the phone times out
into standby mode or another key
is pressed.
Illuminated Keypad
Your keypad lights whenever your phone is turned
on, or a call is received. To help conserve battery
power, the display and keypad backlighting will
turn off, or enter into standby mode, after 16
seconds if no key is pressed. Pressing any key
(except PWR) when the phone is powered on will
illuminate the keypad.
9, to sound and select its
23
Advertisement
Table of Contents
