Kenwood XD-A83 Instruction Manual page 60

60
Sound is harsh or high fre-
quencies are not repro-
duced.
Sound is distorted.
Noise is noticeable.
Sound vibrates.
Recording cannot be started
by pressing the record key.
CD player
Symptom
A CD is placed in the player
but it cannot be played.
Sound is not produced.
Sound skips.
The head is dirty.
The tape is stretched or shrunk.
The tape being played was recorded
with distorted sound.
A tape which has been recorded with
the equalizer and/or surround effects is
being played back by applying the
equalizer effect.
The tape head is magnetized.
External noise is induced.
A tape which has been recorded with
Dolby NR is being played back with-
out switching the Tape Equalizer.
The capstans or pinch rollers are dirty.
The tape is wound irregularly.
The recording protect tab of the cas-
sette has been broken.
The cassette holder is not closed com-
pletely.
The TAPE input is selected.
The tape is fully wound to one of the
reels.
Cause
The disc is placed upside down.
The disc position is displaced.
The disc is extremely dirty.
The disc is scratched.
Dew is condensed on the optics lens.
The disc has not been placed.
The player is not set to the play mode.
The disc is extremely dirty.
The disc is scratched.
The disc is dirty.
The disc is scratched.
The player was subjected to vibration.
In case of difficulty
Clean the head referring to "Mainte-
nance".
Try another tape.
Try another tape.
S w i t c h o f f t h e e q u a l i z e r a n d
surround effects before starting
playback.
Demagnetize the head referring to
"Maintenance".
Install the system at a distance from
other electric appliances and TV.
Switch on the Tape Equalizer.
Clean the head referring to "Mainte-
nance".
Wind the tape again by fast forward-
ing, rewinding or playing from an end
to the other.
Use a cassette with an unbroken re-
cording protect tab or block the hole.
Close the holder completely.
Select the source to be recorded with
the CD, TUNER, or AUX key.
Change the tape transport direction of
deck B or reverse the tape insertion
orientation.
Remedy
Place the disc properly, with the label
side facing upward.
Place the disc properly.
Clean the disc referring to "Handling
of discs and tapes".
Try another disc.
Refer to "Caution on condensation"
and remove the condensation by
evaporation.
Place a disc in the CD player.
Press the play key.
Clean the disc referring to "Handling
of discs and tapes".
Try another disc.
Clean the disc referring to "Handling
of discs and tapes".
Try another disc.
Install the unit in a place not subject to
vibrations.
U
y
U
£
U
£
Y
™
ª
•
)
)
Y
U
)
)
Y
Y